DC 12-24V RS5135 0.56" Red 5-Digit Counter Meter Panel Up Plus Totalizer 0-99999

Description

Store Categories
Store Categories
Other
DC 12-24V RS5135 0.56" Red 5-Digit Counter Meter Panel Up Plus Totalizer 0-99999
Details
Product features:
RS5135 is a totalizing type electronic counter, which can be connected to mechanical switch or NPN normally open sensor as signal input to achieve the purpose of counting quantity.
The RS5135 adopts 12-24V DC power supply and the internal control unit adopts imported microprocessor, which has strong anti-interference ability and is suitable for various harsh industrial occasions and can ensure stable, reliable and continuous work of the counter.
5-digit 0.56-inch (1.42CM high) large size LED display, more convenient to use
Power failure memory function, counting speed 100 times/second, counting range up to 0-99999PCS
The product is suitable for a variety of industrial occasions, such as production line statistics, packaging measurement, flow statistics, etc.
Product parameters:
Working power and power consumption.
Working voltage: DC12V-24V;
Power consumption: <2W
Display mode: five 0.56-inch bright digital tube display
Counting range: 0-99999
Counting speed: 100 times / second
Reset function: external dip switch is required as reset input, low level is effective
Use environment: -10 ° C ~ 50 ° C
Power failure memory: count value power down to maintain long-term memory.
Appearance size (mm): 79 (length) × 43 (width) × 26 (thickness)
Installation method and size (mm): open installation: 75 (L) × 39.5 (W)
Four terminal counter wiring guide.
1: Reset input, connected to the negative pole of the power supply (3) through the dip switch, press to reset the count value to zero.
2: Signal input, available contact or sensor signal input, can be used with mechanical switches, foot switches, travel switches, proximity switches, Hall switches, photoelectric switches, etc. need to choose NPN normally open type.
3:DC power negative
4:DC power supply positive
Note: 1.
1. Contact signal: generally refers to mechanical switches, such as light touch switches, travel switches, foot switches, etc. The switch is turned on once, which is equivalent to a short circuit, generating a counting signal. The input signal is low effective. High voltage signal cannot be input.
The standard counting speed of peal counter is 100 times/second, high speed 500 times/second can be customized. The high speed is reached when the duty cycle is 1:1. Duty cycle is the ratio of time between high and low level of signal.
3. Contact input should be reliable, if the contact jump back to cause more counts, please connect 2.2UF capacitors in parallel at both ends of the contact, to eliminate
4. The signal input line should be as short as possible. Avoid with other strong wires and power lines together, if necessary, please use shielding wire
Product list:
1* Counting meter
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Returns Policy
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2017 DataCaciques
Home
Payment
Return Policy
About us
Contact us
DC 12-24V RS5135 0.56" Red 5-Digit Counter Meter Panel Up Plus Totalizer 0-99999
Details
Product features:
RS5135 is a totalizing type electronic counter, which can be connected to mechanical switch or NPN normally open sensor as signal input to achieve the purpose of counting quantity.
The RS5135 adopts 12-24V DC power supply and the internal control unit adopts imported microprocessor, which has strong anti-interference ability and is suitable for various harsh industrial occasions and can ensure stable, reliable and continuous work of the counter.
5-digit 0.56-inch (1.42CM high) large size LED display, more convenient to use
Power failure memory function, counting speed 100 times/second, counting range up to 0-99999PCS
The product is suitable for a variety of industrial occasions, such as production line statistics, packaging measurement, flow statistics, etc.
Product parameters:
Working power and power consumption.
Working voltage: DC12V-24V;
Power consumption: <2W
Display mode: five 0.56-inch bright digital tube display
Counting range: 0-99999
Counting speed: 100 times / second
Reset function: external dip switch is required as reset input, low level is effective
Use environment: -10 ° C ~ 50 ° C
Power failure memory: count value power down to maintain long-term memory.
Appearance size (mm): 79 (length) × 43 (width) × 26 (thickness)
Installation method and size (mm): open installation: 75 (L) × 39.5 (W)
Four terminal counter wiring guide.
1: Reset input, connected to the negative pole of the power supply (3) through the dip switch, press to reset the count value to zero.
2: Signal input, available contact or sensor signal input, can be used with mechanical switches, foot switches, travel switches, proximity switches, Hall switches, photoelectric switches, etc. need to choose NPN normally open type.
3:DC power negative
4:DC power supply positive
Note: 1.
1. Contact signal: generally refers to mechanical switches, such as light touch switches, travel switches, foot switches, etc. The switch is turned on once, which is equivalent to a short circuit, generating a counting signal. The input signal is low effective. High voltage signal cannot be input.
The standard counting speed of peal counter is 100 times/second, high speed 500 times/second can be customized. The high speed is reached when the duty cycle is 1:1. Duty cycle is the ratio of time between high and low level of signal.
3. Contact input should be reliable, if the contact jump back to cause more counts, please connect 2.2UF capacitors in parallel at both ends of the contact, to eliminate
4. The signal input line should be as short as possible. Avoid with other strong wires and power lines together, if necessary, please use shielding wire
Product list:
1* Counting meter
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to
wait 30 days
,
Please take care it.Less than 30 days,we can't take a refund
.
Payment Method
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers
are responsible
for import duties,custom fees and taxes, if any, please check your country.
Returns Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.